00:07:02 natalia barankova: whats happeninnngg 00:07:49 arman: I guess they are setting up 00:07:58 David Prieto: Probably 00:08:09 David Prieto: someone was sleepy today xD 00:09:50 Mitalee Parikh: Gooooooo David! 00:13:33 David Prieto: yolo? 00:13:54 Andrea Bertran: open cv 00:13:57 arman: https://github.com/divikshrivastava/drfoodie 00:16:05 natalia barankova: HALAAAAA hahahaha 00:16:19 Daphne Gerodimou: THE SONG 00:16:21 Hala Alzawaydeh: hhahaahahahahahahahahahah 00:16:27 Hala Alzawaydeh: WOW 00:16:37 David Prieto: https://www.youtube.com/watch?v=nBHkIWAJitg 00:16:51 natalia barankova: We all know the song don’t worry :D 00:16:53 Laura Freixas Conde: yesss please! 00:16:55 natalia barankova: plaaaaay 00:17:39 Daphne Gerodimou: I want your morning energy 00:17:55 David Prieto: And I don't even drink coffee! xD 00:18:46 Daphne Gerodimou: A watery swim 00:18:47 Daphne Gerodimou: wow 00:19:14 David Prieto: swag 00:22:13 Oscar Gonzalez: http://91.126.132.4:8080/?action=stream 00:22:59 Daniil Koshelyuk: what is that magical place? 00:23:28 Benjamin S: I’d love to go there one day 00:23:35 Laura Freixas Conde: me too jaja 00:24:28 Oscar Gonzalez: https://thecncbythesea.hopto.org 00:24:45 Benjamin S: logins? 00:26:02 Benjamin S: 700 x 700 00:26:39 Oscar Gonzalez: username: fablabbcn 00:27:07 Oscar Gonzalez: password: thisisamazing 00:27:36 Oscar Gonzalez: https://gitlab.com/fablabbcn-projects/learning/the-cnc-by-the-sea 00:28:58 Daniil Koshelyuk: the irony of live control of CNC 00:31:19 Benjamin S: Can’t you tell us what z to use? 00:32:16 Benjamin S: What are the settings to use? RPM, travel speed, etc. ? 00:32:29 Benjamin S: I’m guessing RPM = 0 ? 00:35:55 arman: https://github.com/vishpat/svg2gcode 00:37:33 Pablo Zuloaga: yes 00:38:38 natalia barankova: Can you please send this link again? 00:38:49 Pablo Zuloaga: https://gitlab.com/fablabbcn-projects/learning/the-cnc-by-the-sea 00:38:52 natalia barankova: thanks 00:39:03 Pablo Zuloaga: the one I don´t have is for the interface 00:39:22 Oscar Gonzalez: https://thecncbythesea.hopto.org 00:39:26 Pablo Zuloaga: gracias 00:40:55 Laura Freixas Conde: http://91.126.132.4:8080/?action=stream 00:40:59 Oscar Gonzalez: http://91.126.132.4:8080/?action=stream 00:41:11 Pablo Zuloaga: oscar, the username and password are the same you sent before…fablabbcn…. 00:41:28 Pablo Zuloaga: said nothing, it worked 00:41:57 Benjamin S: sername: fablabbcn
password: thisisamazing 00:44:12 Daniil Koshelyuk: G commands to move M commands to setup 00:44:35 Benjamin S: G-Unit 00:45:25 Benjamin S: https://marlinfw.org/meta/gcode 00:47:17 Benjamin S: Great connection 00:49:33 David Prieto: G90 (ABSOLUT MODE) G21 (SET MILIMETERS UNIT) G28 (SET HOME WITH THE CALIBRATION) 00:58:06 Benjamin S: that could be the game 00:58:11 Benjamin S: Attack Neil 00:58:25 Daniil Koshelyuk: Poor Neil 00:58:32 Benjamin S: slowly 00:58:33 Laura Freixas Conde: is neil looking at this? 00:58:37 Benjamin S: suspense 00:58:38 Daniil Koshelyuk: Nail the Neil 00:58:54 Benjamin S: @LAura we’ll send him 00:59:00 Laura Freixas Conde: jajajajajajaja 00:59:20 Benjamin S: PERFECT 00:59:29 David Prieto: FATALITY 01:00:03 Benjamin S: 700x700x10 01:00:23 Laura Freixas Conde: this are the dimensions of the sand? 01:00:37 Benjamin S: Not me 01:00:42 David Prieto: not me also 01:00:43 Benjamin S: (me) 01:01:06 Daniil Koshelyuk: ups 01:05:24 natalia barankova: Can you please send the code plugin again? 01:05:39 Mitalee Parikh: https://marlinfw.org/meta/gcode/ 01:05:43 natalia barankova: thanks! 01:05:55 Oscar Gonzalez: http://academany.fabcloud.io/fabacademy/2020/labs/barcelona/site/local/#material/extras/makeclub/gcode/ 01:08:23 Pablo Zuloaga: yes pleaase 01:09:20 arman: https://github.com/vishpat/svg2gcode/tree/plastibot_laser 01:09:53 antoine: thanks! 01:10:42 Magdalena Mojsiejuk: that’s the error I’m getting: error: SVG width not found 01:11:03 Magdalena Mojsiejuk: in fabmodules 01:15:55 Cesar Rodriguez: I’m in the interface, but i’m not sure where to add the json file 01:16:16 Mitalee Parikh: Settings > interfaces > workplace > import 01:16:21 Cesar Rodriguez: Thank youuu! 01:16:35 Mitalee Parikh: workspace* 01:17:19 Daphne Gerodimou: Arman how come there is no grasshopper plugin for this :p ? 01:20:17 Benjamin S: G28 01:20:53 arman: there is actually 01:21:12 arman: :)) 01:21:39 arman: https://www.food4rhino.com/app/droid-3d-print-slicer-and-path-plotter 01:21:41 Daphne Gerodimou: I was waiting for you to say it 01:21:58 David Prieto: I'm preparing the svg! 01:24:02 Andrea Bertran: go! 01:24:30 Andrea Bertran: mandala jajajajajja 01:24:32 Adel Sarvary: how can I create sag from jpg in inkscape? 01:24:37 Adel Sarvary: svg 01:24:52 David Prieto: you have to vectorize it 01:24:58 Andrea Bertran: yeap. 01:25:10 Andrea Bertran: i would use illustrator and sabe the file as svg 01:25:18 Andrea Bertran: save* 01:25:36 Adel Sarvary: thank you 01:26:05 Laura Freixas Conde: and once you have the svg in illustrator what are you going to do andrea? 01:26:22 Andrea Bertran: fab modules 01:26:44 Andrea Bertran: if it doesn't work try to open the svg file in Inkscape and save it again as svg file 01:26:53 Andrea Bertran: after this you should be fine with fab modules 01:27:09 Andrea Bertran: or follow Josep :) 01:28:22 Andrea Bertran: https://github.com/cnc-club/gcodetools 01:28:23 Benjamin S: I used Photoshop, created a 700x700mm document, draw my stuff, exported as PNG, and used mods > program > G-code > 2d mill and then changed the settings and it seems to have created a g-code file that’s good. 01:28:44 Laura Freixas Conde: super! thank you:) 01:28:46 Benjamin S: In path to G-code make sure you use mm in format 01:30:43 Magdalena Mojsiejuk: if exported svg from illustrator is not working, you can also convert AI to svg in an online converter and then suddenly it works in fabmodules. 01:31:07 Magdalena Mojsiejuk: crazy 01:31:38 Laura Freixas Conde: could you send the link of the converter you’re using magda? 01:32:27 Benjamin S: p.s. in mods make sure to match the DPI to the one you set in photoshop 01:32:41 natalia barankova: josep can you show again how it works in that online tool jscutpelase? 01:33:12 Andrea Bertran: who goes after mitalee? 01:33:57 Adel Sarvary: thank you Josep, I am trying to draw something simple in illustrator and use that as png as Ben suggested, I hope that works 01:34:13 David Prieto: now it's empty. I still need some time to make the gcode 01:34:28 natalia barankova: One question do we need to put the image within the 700x700 and then export and generate gcoe? 01:34:38 natalia barankova: if so, where should we place it within the canvas? 01:35:39 Andrea Bertran: yeah you have to vectorize it too 01:36:29 Andrea Bertran: image trace 01:36:32 Daphne Gerodimou: Trace — black and white logo 01:36:35 Daphne Gerodimou: expand 01:36:43 Daphne Gerodimou: And then ungroup 01:36:57 Daphne Gerodimou: image trace* 01:37:40 Georgia Restou: can someone tell me what we change when we try to generate 01:37:56 Benjamin S: @Georgia where? 01:37:57 Andrea Bertran: can i try after ben? 01:38:02 Benjamin S: Of course 01:38:03 David Prieto: http://fabacademy.org/2020/labs/barcelona/students/david-prieto/assignments/week03/ 01:38:18 David Prieto: about vectorize I documented in the second week 01:38:29 Georgia Restou: inkscape 01:38:49 Andrea Bertran: and put g28! 01:39:10 Benjamin S: Make sure Z is above 0 01:39:17 Benjamin S: and under 20 if you want the sand to be written on 01:39:25 Benjamin S: And then X and Y should be max 700 01:40:51 Georgia Restou: thanks 01:41:10 Mitalee Parikh: I’m done guys 01:41:16 Mitalee Parikh: someone can go 01:41:22 Andrea Bertran: ben, share nice! 01:41:49 Benjamin S: Thank you 01:43:10 Benjamin S: can\’t upload a Gcode file 01:43:29 Benjamin S: Sorry I’m being an idiot 01:44:50 Benjamin S: it doesn’t want to run though 01:45:51 Mitalee Parikh: ben put the initial few commands individually 01:46:23 Benjamin S: I put one or two and it moves 01:46:24 Benjamin S: moved* 01:46:36 Mitalee Parikh: yeah 01:46:58 Benjamin S: but the g-code file doesn’t 01:54:37 Andrea Bertran: hmmmmm it says "no serial connection" 01:54:48 Andrea Bertran: maybe someone else can go 01:55:15 Cesar Rodriguez: is anyone else unable to make the gcode? I keep getting this error 01:56:07 Andrea Bertran: try 01:56:14 Andrea Bertran: can you share your screen while doing it? 01:56:33 Andrea Bertran: a "no serial connection" appears for me... 01:56:34 natalia barankova: This doesn’t seem as correct simulation right?:D 02:02:36 Daphne Gerodimou: Does anyone have the settings they used in fabmodules? 02:04:31 Daniil Koshelyuk: So that's what servo motor command is doing XD 02:05:12 Georgia Restou: xD 02:05:13 Adel Sarvary: Daphne, this is what Ben wrote about fabmodules: used mods > program > G-code > 2d mill and then changed the settings and it seems to have created a g-code file that’s good. 02:05:21 Adel Sarvary: or maybe I’m confused 02:05:28 Adel Sarvary: and this is mods 02:05:48 Daphne Gerodimou: ahhh sorry <3 02:06:13 Adel Sarvary: is it normal that my Y-s are minus?? 02:06:48 Cesar Rodriguez: I HAVE A G CODE. Now what lol 02:07:14 Andrea Bertran: I'll try 02:07:29 Andrea Bertran: I'm not sure it will work but 02:07:33 Andrea Bertran: aaa cesar go ahead 02:07:38 Cesar Rodriguez: im not sure if I made it right. Go Andrea lol 02:07:45 Cesar Rodriguez: Im too scared to go 02:07:49 Andrea Bertran: hahahahahha me too 02:08:54 Andrea Bertran: YO 02:08:59 Andrea Bertran: mi micrófono no funciona 02:09:11 Andrea Bertran: okok 02:09:51 Andrea Bertran: hmmmm 02:09:58 Andrea Bertran: es que necesito compartir pantalla 02:10:06 Andrea Bertran: estoy un poco liada 02:12:02 natalia barankova: Could I try to go after Andrea unless someone else wanted to? 02:13:45 Benjamin S: Daphne my settings in Fab modules, but careful, the Z is set to -10, so open the file in a text editor, find all the Z-10 and replace with Z10 02:13:59 Andrea Bertran: pero... hago de nuevo lo de fab modules? 02:14:16 Benjamin S: Usually Z0 is the top of the material, here Z0 is the table so you can’t have negative 02:14:29 Andrea Bertran: ok 02:15:58 Andrea Bertran: pero no tengo que cambiar los z? 02:18:12 Andrea Bertran: cambio otra cosa? 02:18:48 Benjamin S: Cambia G01 to G1 02:19:44 Andrea Bertran: and where do i change the speed? 02:20:10 Benjamin S: Aah you’re speaking to Oscar hahaha 02:20:18 Laura Freixas Conde: F is speed? 02:20:30 Benjamin S: Yes, I think it stands for Feedrate 02:20:39 Andrea Bertran: so many things.. 02:21:39 Andrea Bertran: if doesn't work.. maybe someone else can go 02:21:41 Andrea Bertran: sorry 02:23:51 Andrea Bertran: and i have to change again everything right? 02:23:59 Andrea Bertran: no its fine 02:24:05 Andrea Bertran: but if someone else has it ready 02:25:46 Laura Freixas Conde: oscar why Z5? 02:26:03 Adel Sarvary: hello, could someone please advise what to do when I keep receiving minus values for Y when creating the code? thank you 02:27:46 Andrea Bertran: Hmmm 02:28:05 Andrea Bertran: i'll try to do it from Inkscape instead of fabmodules 02:28:52 Andrea Bertran: it's fine.. i'll change it from Inkscape then 02:28:58 Benjamin S: in Fab Modules try and use program server > g-code > 2d mill 02:28:59 Mitalee Parikh: replace all 9. with 90. and so on? 02:29:03 Benjamin S: You can use a mm setting rather than inches 02:29:06 Andrea Bertran: yeah 02:29:30 Andrea Bertran: mi bluetooth dejó de funcionar y conectando los audífonos no funciona 02:29:32 Benjamin S: pretty much have nothing to change in the file after 02:29:41 Andrea Bertran: ok ben. i'll try 02:29:50 Daphne Gerodimou: did anyone manage to do it via inskcape? 02:30:00 Daphne Gerodimou: Because for me it is not working 02:30:26 Georgia Restou: daphne 02:31:05 Georgia Restou: I have a gcode but I am not sure if it is what we want 02:31:18 Adel Sarvary: I’m trying to use jscut 02:31:46 Adel Sarvary: anyone who uses that also got minus Ys? 02:32:09 Adel Sarvary: is there a way to fix that there? 02:35:06 Andrea Bertran: don't do it in Notepad 02:35:11 Andrea Bertran: open it with atom 02:36:31 Andrea Bertran: yeah 02:37:52 Georgia Restou: do I need to replace anything else? 02:38:35 Mitalee Parikh: basically you just want lines starting from G0, G1 or G28 that’s all 02:38:55 Benjamin S: It should be something like 02:38:56 Mitalee Parikh: or M280 in case of the cleaning 02:38:57 Benjamin S: G28 02:39:01 Benjamin S: G0 Z30 02:39:06 Benjamin S: F3000 02:39:11 Benjamin S: And then all your G1s 02:39:29 Benjamin S: not for you Edu 02:40:56 Georgia Restou: thank you guys 02:42:07 Daniil Koshelyuk: yay always a fun one 02:42:36 Georgia Restou: who wants to go? 02:43:07 Andrea Bertran: you can go 02:48:42 Daniil Koshelyuk: You didn't change Z 02:54:20 Cesar Rodriguez: can I go next? 02:54:21 FABACADEMY_BCN ZOOM: http://91.126.132.4:8080/?action=stream 03:03:41 Daniil Koshelyuk: Niice 03:04:04 Magdalena Mojsiejuk: amazing 03:05:47 Andrea Bertran: ok 03:07:54 Andrea Bertran: mine was nc too 03:09:28 Andrea Bertran: abstract 03:28:07 Benjamin S: https://docs.google.com/document/d/1i6vJv0QFi7BDOT4lfcS_lZZLLg8uyVGi2q8Hzvs1MeM/edit# 03:28:50 Mitalee Parikh: it’s locked 03:31:14 Benjamin S: https://docs.google.com/document/d/1i6vJv0QFi7BDOT4lfcS_lZZLLg8uyVGi2q8Hzvs1MeM/edit?usp=sharing 03:39:05 Mitalee Parikh: Wooooohoooo 03:39:12 Daniil Koshelyuk: That's very specific 03:39:25 Zoe Tzika: It's great!! 03:39:32 Zoe Tzika: Thanks Oscar and Edu! 03:39:43 Daphne Gerodimou: great job guys 03:40:02 Daphne Gerodimou: We are more slaves than pioneers but still happy 03:42:24 Daniil Koshelyuk: Homing 03:42:44 Benjamin S: I think now it’s public, documentation for how to use this wonderful piece of technology: https://docs.google.com/document/d/1i6vJv0QFi7BDOT4lfcS_lZZLLg8uyVGi2q8Hzvs1MeM/edit?usp=sharing 03:43:05 Magdalena Mojsiejuk: i got notification:) should work, thank you! 03:43:19 Benjamin S: More importantly how to generate the g-code file to be honest 03:44:07 Zoe Tzika: Great documentation Benjy! Thanks! 03:44:16 Daniil Koshelyuk: that's cheating, you're helping the machine! 03:44:44 Daniil Koshelyuk: Thanks, Benjy! 03:50:01 Andrea Bertran: thank you!! 03:58:07 FABACADEMY_BCN ZOOM: http://91.126.132.4:8081/?action=stream 03:59:11 Andrea Bertran: who is going next? 04:00:05 Mitalee Parikh: i think pablo 04:00:10 Mitalee Parikh: or juanita 04:01:26 Daniil Koshelyuk: which port is the second one? 04:02:30 Daniil Koshelyuk: ah got it 04:07:15 FABACADEMY_BCN ZOOM: http://91.126.132.4:8080/?action=stream 04:20:05 Adel Sarvary: Could I ask for help after Juanita is done? 04:20:48 Magdalena Mojsiejuk: I need to go now, Thank you very much!! 04:26:15 Wongsathon Choonhavan: I can go after Pablo If I have time 04:27:10 Wongsathon Choonhavan: If it not too late haha 04:32:05 natalia barankova: Can I go after Adele possibly? 04:33:32 antoine: I have to go, thanks guys for the experiment! And see you tomorrow to understand how you made it work :-) cheers!